D-MAX DCC-601DV Instrukcja Obsługi Pobierz pdf (Strona 14)

Use the White Balance function to adjust the screen color.

1. When the SETUP menu screen is displayed, select ‘White Bal.’ by using the Up and Down buttons so that

the arrow indicates ‘White Bal.’ .

2. Select a desired mode using the Up and Down buttons.

※ Select one of the following 5 modes, as appropriate for your purpose.

● ATW : Select this when the color temperature is between 1800°K and 10500°K

● INDOOR : Select this when the color temperature is between 4500°K and 8500°K.

● OUTDOOR : Select this when the color temperature is between 1800°K and 10500°K.

(sodium light inclusion)

● AWC → SET : To find the optimal setting for the current luminance environment in this mode, set the

point the camera towards a sheet of white paper and press the SET button. If the environment changes,

readjust it.

● MANUAL : Select this to fine-tune White Balance manually. Set White Balance first by using the ATW or

AWC mode. After that switch to MANUAL mode, fine-tune the White Balance and then press the SET

button.

☞ Note

• White Balance may not work properly under the following conditions.

In this case select the AWC mode.

① When the color temperature of environment surrounding the subject is out of the control range (e.g. clear

sky, or sunset)

② When the ambient illumination of the subject is dim.

③ If the camera is directed towards a fluorescent light or is installed in a place where illumination changes

dramatically, the White Balance operation may become unstable.

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 26 27

Brak uwag

D-MAX DCC-601DV Instrukcja Obsługi Strona 14