D-MAX DMC-20SEC Instrukcja Użytkownika Pobierz pdf (Strona 16)

2Mega HD-SDI Speed Dome Camera User manual

3. DIP switch setting

3.1. DIP Switch setting

-Termination Resistor (DIP S2/SW1)

-Turn the last camera on the data line as a

switch to turn on/off the terminal resistor on.

Turn the DIP SW of some of the farthest

cameras on in the case of the data lines

distributed to several directions.

* The default is off.

-Address / Initial Select (DIP S2/SW2)

Set ADDRESS DIP SW in the status of ADDRESS

(*Reference to next page*)

(.*** The first default is ADDRESS.**)

-Set the communication speed (baud rates) and

Protocol (Demand for the technical inquiry) up in

the state of the INITAIL.

-Select PAL / NTSC system (DIP S2/SW 3)

-Power On/Off (DIP S2/SW 4)

Set DIP SW only in the status of Power off.

Then turn on the power after setting DIP SW.

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 46 47

Brak uwag

D-MAX DMC-20SEC Instrukcja Użytkownika Strona 16